G5000
G-fillerTM5000 Series Thermal Gap
Filler
Conformable gap filler
G-filler™ 5000 is a highly conformable gap filler designed to provide
excellent thermal performance while remaining cost effective.
This soft interface pad conforms well with minimal pressure,
resulting in little or no stress on the mating parts.
Details
G-fillerTM5000 Series Thermal Gap
Filler
Conformable gap filler
G-filler™ 5000 is a highly conformable gap filler designed to provide
excellent thermal performance while remaining cost effective.
This soft interface pad conforms well with minimal pressure,
resulting in little or no stress on the mating parts.
G-filler™ 5000’s unique silicone formulation has extremely low
silicone extractables compared to other silicone interface materials
and also meets NASA outgassing requirements.
G-filler™ 5000 is naturally tacky, requiring no adhesive coating to
inhibit thermal performance. G-filler™ 5000 is electrically insulating,
stable from -45ºC to 200ºC and meets UL 94V0 rating.
Features and Benefits:
• Highly conformable and cost effective
• Low thermal resistance at low pressures
• Designed to have very low silicone extractables
• Meets NASA Outgassing requirements
• Available in thicknesses from
0.020" (0.5mm) to 0.200" (5.0mm)
• Naturally tacky needing no further adhesive coating
• Low silicone extractibles
Applications:
• Cooling components to the chassis or frame
• High speed mass storage drives
• RDRAM memory modules
• Heat pipe thermal solutions
• Automotive engine control units
• Telecommunication hardware
G-filler™ 5000 Series Thermal Gap Filler
|
G-filler™ 5200 |
G-filler™ 5400 |
G-filler™ 5600 |
G-filler™ 5800 |
G-filler™ 5110 |
Test Method |
|
|
Construction & Composition |
Reinforced silicone elastomer |
Silicone elastomer |
Silicone elastomer |
Silicone elastomer |
Silicone elastomer |
|
|
Color |
Blue |
Blue |
Blue |
Blue |
Blue |
Visual |
|
Thickness |
0.020" (0.51mm) |
0.040" (1.02mm) |
0.060" (1.52mm) |
0.080" (2.03mm) |
0.100" (2.54mm) |
|
|
Thickness Tolerance |
± 0.002" (± 0.05mm) |
± 0.004" (± 0.10mm) |
± 0.006" (± 0.15mm) |
± 0.008" (± 0.20mm) |
± 0.010" (± 0.25mm) |
|
|
Density |
3.0 g/cc |
3.0 g/cc |
3.0 g/cc |
3.0 g/cc |
3.0 g/cc |
Helium Pycnometer |
|
Hardness |
70 Shore OO |
40 Shore OO |
40 Shore OO |
40 Shore OO |
40 Shore OO |
ASTM D2240 |
|
Tensile Strength |
N/A |
66 psi |
66 psi |
46 psi |
46 psi |
ASTM D412 |
|
% Elongation |
N/A |
56.6% |
56.6% |
97.5% |
97.5% |
ASTM D412 |
|
Outgassing TML |
0.29% |
0.29% |
0.29% |
0.29% |
0.29% |
ASTM E595 |
|
Outgassing CVCM |
0.04% |
0.04% |
0.04% |
0.04% |
0.04% |
ASTM E595 |
|
UL Flammability Rating |
94 VO |
94 VO |
94 VO |
94 VO |
94 VO |
E180840 |
|
Temperature Range |
-45°C to 200°C |
-45°C to 200°C |
-45°C to 200°C |
-45°C to 200°C |
-45°C to 200°C |
|
|
Thermal Conductivity |
2.8 W/mK |
2.8 W/mK |
2.8 W/mK |
2.8 W/mK |
2.8 W/mK |
ASTM D5470 (modified) |
|
Thermal Impedance |
||||||
|
@ 10 psi |
0.40 °C-in2/W |
0.50 °C-in2/W |
0.63 °C-in2/W |
0.77 °C-in2/W |
0.91 °C-in2/W |
ASTM D5470 |
|
@ 69KPa |
2.56 °C-cm2/W |
3.23 °C-cm2/W |
4.07 °C-cm2/W |
4.96 °C-cm2/W |
5.87 °C-cm2/W |
(modified) |
|
Thermal Expansion |
37.4 ppm/°C |
37.4 ppm/°C |
37.4 ppm/°C |
37.4 ppm/°C |
37.4 ppm/°C |
IPC-TM-650 |
|
Breakdown Voltage |
7400 Volts AC |
9200 Volts AC |
>10,000 Volts AC |
>10,000 Volts AC |
>10,000 Volts AC |
ASTM D149 |
|
Volume Resistivity |
9.6 x 1012ohm-cm |
9.6 x 1012ohm-cm |
9.6 x 1012ohm-cm |
9.6 x 1012ohm-cm |
9.6 x 1012ohm-cm |
ASTM D257 |
|
Dielectric Constant @ 1MHz |
13.61 |
13.61 |
13.61 |
13.61 |
13.61 |
ASTM D150 |
Standard Thicknesses:
|
0.020" (0.51mm) 0.070" (1.78mm) 0.120" (3.05mm) 0.170" (4.32mm) |
0.030" (0.76mm) 0.080" (2.03mm) 0.130" (3.30mm) 0.180" (4.57mm) |
0.040" (1.02mm) 0.090" (2.29mm) 0.140" (3.56mm) 0.190" (4.83mm) |
0.050" (1.27mm) 0.100" (2.54mm) 0.150" (3.81mm) 0.200" (5.08mm) |
0.060" (1.52mm) 0.110" (2.79mm) 0.160" (4.06mm) |
Consult the factory for alternate thicknesses
Standard Sheet Sizes:
9" x 9" (229mm x 229mm) G-filler™ 5000 may be die cut into individual shapes. Pressure sensitive adhesive is not applicable
for G-filler™ products.
Tacky One Side Only:
G-filler™ 5000 is naturally tacky on both sides. G-filler™ 5000 can be provided tacky on one side only. This is indicated
by the suffix “DC1”. This option offers good separation properties allowing the tacky side to stick to the
heatsink/chasis/coldplate/etc. and the other “dry” side to release easily from the component(s).
Reinforcement:
0.020" (0.51mm) and 0.030" (0.762mm) are fiberglass reinforced.
Our customers are reminded that they bear the responsibility for testing Laices Technologies’ materials for their proposed use. Any information furnished by Laices Technologies and its agents is believed to be accurate and reliable, but our
customers must bear all responsibility for the use and application of Laices Technologies’ materials since Laices Technologies’ and its agents cannot be aware of all potential use. Laices Technologies makes no warranties as to the fitness,
merchantability, or suitability of any Laices Technologies’ materials or products for any specific or general uses. Laices Technologies shall not be liable for incidental or consequential damages of any kind. All Laices Technologies’
products are sold pursuant to the Laices Technologies’ domestic terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request.
laices@126.com
0755-89704985
0755-89704982
