G3000
UNIQUE SILICONE GEL OFFERS COMPLIANCY, THERMAL RESISTANCE
G-filler™ 3000, at pressures of 50psi, will deflect to over 50% the original thickness. This
high rate of compliancy allows the material to “totally blanket” the component, enhancing
thermal transfer. The material has a very low compression set enabling the pad to be reused
Details
UNIQUE SILICONE GEL OFFERS COMPLIANCY, THERMAL RESISTANCE
G-filler™ 3000, at pressures of 50psi, will deflect to over 50% the original thickness. This
high rate of compliancy allows the material to “totally blanket” the component, enhancing
thermal transfer. The material has a very low compression set enabling the pad to be reused
many times.
G-filler™ 3000, in achieving its stellar compliancy, does not sacrifice thermal performance.
With a thermal conductivity of 1.2 W/mK, low thermal resistances can be achieved at low
pressures.
G-filler™ 3000-H is offered with a hard, metallized liner option for easy handling and improved
rework. The metallized liner’s lower coefficient of friction also allows for easy assembly of
parts that must slide together, such as a card into a chassis.
G-filler™ 3000-TG is offered with a cut-through resistant T-gard™ silicone liner. The TG liner
offers a guaranteed dieletric barrier, and easier part handling for mass production.
FEATURES AND BENEFITS
• Extreme compliancy allows material to “totally blanket” component(s)
• Thermal conductivity of 1.2 W/mK
• Available in thicknesses from 0.020” - 0.200” (.5mm – 5.0mm)
• Low compression set enables the pad to be reused many times
APPLICATIONS
• Notebook and desktop computers
• Telecommunication hardware
• Hard disk drives, DVDs
• Flat Panel Displays
• Memory modules
• Power conversion equipment
• Set top box
• Lighting ballast
|
G-FILLER™ 3200 |
G-FILLER™ 3400 |
G-FILLER™ 3600 |
G-FILLER™ 3800 |
G-FILLER™ 3100 |
TEST METHOD |
|
|
Construction & Composition |
Ceramic filled silicone elastomer |
Ceramic filled silicone elastomer |
Ceramic filled silicone elastomer |
Ceramic filled silicone elastomer |
Ceramic filled silicone elastomer |
|
|
Color |
Light Green |
Light Green |
Light Green |
Light Green |
Light Gray |
Visual |
|
Thickness |
0.020" (0.51mm) |
0.040" (1.02mm) |
0.060" (1.52mm) |
0.080" (2.03mm) |
0.100"(2.54mm) |
|
|
Thickness Tolerance |
± 0.002" (± 0.05mm) |
± 0.004" (± 0.10mm) |
± 0.006" (± 0.15mm) |
± 0.008" (± 0.20mm) |
± 0.010" (± 0.254mm) |
|
|
Density |
1.78 g/cc |
1.75 g/cc |
1.75 g/cc |
1.75 g/cc |
1.75 g/cc |
Helium Pycnometer |
|
Hardness |
45 Shore 00 |
20 Shore 00 |
20 Shore 00 |
20 Shore 00 |
20 Shore 00 |
ASTM D2240 |
|
Tensile Strength |
N/A |
15 psi |
15 psi |
15 psi |
15 psi |
ASTM D412 |
|
% Elongation |
N/A |
50 |
50 |
50 |
50 |
ASTM D412 |
|
% Deflection |
||||||
|
@ 10 psi |
4% |
21% |
26% |
30% |
33% |
|
|
@ 50 psi |
23% |
48% |
53% |
58% |
63% |
|
|
@ 100 psi |
43% |
61% |
68% |
72% |
76% |
|
|
Outgassing TML (Post Cured) |
0.56% |
0.56% |
0.56% |
0.56% |
0.56% |
ASTM E595 |
|
Outgassing CVCM (Post Cured) |
0.1% |
0.1% |
0.1% |
0.1% |
0.1% |
ASTM E595 |
|
UL Flammability Rating |
UL 94 V0 |
UL 94 V0 |
UL 94 V0 |
UL 94 V0 |
UL 94 V0 |
E180840 |
|
Temperature Range |
-40°C to 160°C |
-40°C to 160°C |
-40°C to 160°C |
-40°C to 160°C |
-40°C to 160°C |
|
|
Thermal Conductivity |
1.2 W/mK |
1.2 W/mK |
1.2 W/mK |
1.2 W/mK |
1.2 W/mK |
ASTM D5470 (modified) |
|
Total Thermal |
||||||
|
Resistance |
0.84 °C-in2/W |
1.15 °C-in2/W |
1.50 °C-in2/W |
1.8 °C-in2/W |
2.22 °C-in2/W |
ASTM D5470 |
|
@ 10 psi @ 69KPa |
5.42 °C-cm2/W |
7.42 °C-cm2/W |
9.68 °C-cm2/W |
11.61 °C-cm2/W |
14.32 °C-cm2/W |
(modified) |
|
Thermal Expansion 58°C tp 103°C |
754 ppm/°C |
754 ppm/°C |
754 ppm/°C |
754 ppm/°C |
754 ppm/°C |
IPC-TM-650 2.4.24 |
|
Breakdown Voltage |
6,000 VAC |
>10,000 VAC |
>10,000 VAC |
>10,000 VAC |
>10,000 VAC |
ASTM D149 |
|
Volume Resistivity |
6 x 1013ohm-cm |
6 x 1013 ohm-cm |
6 x 1013 ohm-cm |
6 x 1013 ohm-cm |
6 x 1013 ohm-cm |
ASTM D257 |
|
Dielectric Constant @ 1MHz |
5.5/4/4 |
5.5/4/4 |
5.5/4/4 |
5.5/4/4 |
5.5/4/4 |
ASTM D150 |
STANDARD THICKNESSES
0.020" (0.51mm) 0.030" (0.76mm) 0.040" (1.02mm) 0.050" (1.27mm)
0.060" (1.52mm) 0.070" (1.78mm) 0.080" (2.03mm) 0.090" (2.29mm)
0.100" (2.54mm) 0.110" (2.79mm) 0.120" (3.05mm) 0.130" (3.30mm)
0.140" (3.56mm) 0.150" (3.81mm) 0.160" (4.06mm) 0.170" (4.32mm)
0.180" (4.57mm) 0.190" (4.83mm) 0.200" (5.08mm)
Consult the factory for alternate thicknesses
STANDARD SHEET SIZES
9" x 9" (229mm x 229mm)
18” x 18” (457mm x 457mm). 9” x 9” only over 0.100” thickness.
OPTIONS
Fiberglass reinforcement is optional in only 0.040” thickness:
“FG” suffix (Ex: G-filler™ 340-FG).
Metallized carrier on one side: “H” suffix (Ex: G-filler™ 340-H).
T-gard™ carrier on one side: “TG” suffix (Ex: G-filler™ 340-TG).
Data for design engineer guidance only. Observed performance varies in
application. Engineers are reminded to test the material in application.
THR-SPEC-G-FILLER-200TV0 0409
Any information furnished by Laices Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laices Technologies
materials rests with the end user since Laices Technologies and its agents cannot be aware of all potential uses. Laices Technologies makes no warranties as to the fitness,
merchantability, or suitability of any Laices Technologies materials or products for any specific or general uses. Laices Technologies shall not be liable for incidental or
consequential damages of any kind. All Laices Technologies products are sold pursuant to the Laices Technologies domestic terms and conditions of sale in effect from
time to
time, a copy of which will be furnished upon request.damages of any kind. All Laices Technologies’ products are sold pursuant to the Laices Technologies’ domestic
terms and
conditions of sale in effect from time to time, a copy of which will be furnished upon request. Rev. B A15293-00, 08
laices@126.com
0755-89704985
0755-89704982
