is low melting point thermal interface material. At 50 ℃, PCSA- 11series begins to soften and flow, filling the microscopic irregularities of both the thermal solution and the integrated circuit package surface, thereby reducing thermal resistance.TIC™800A series is a flexible solid at room temperature and freestanding without reinforcing components that reduce thermal performance. PCS-A-11Series shows no thermal performance degradation after 1,000 hours@130 ℃,or after 500 cycles, from -25℃ to 125℃.The material softens and does not fully change state resulting in minimal migration (pump out)at operating temperatures.

For Lowest Thermal Resistance :
》0.018℃-in² /W thermal resistance
》Naturally tacky at room temperature, no adhesive required
》No heat sink preheating required

Applications Include:
》High Frequency Microprocessors
》Notebook and Desktop PCs
》Computer Serves
》Memory Modules
》Cache Chips
》IGBTs


Typical Properties of PCS-A-11 Series

Product Name	PCS-A-11			Test Method
Color	Ashy	Ashy	Ashy	Ashy	Visual
Thickness	0.003" (0.076mm)	0.005" (0.126mm)	0.008" (0.203mm)	0.010" (0.254mm)
Thickness Tolerance	±0.0006´´ (±0.016mm)	±0.0008´´ (±0.019mm)	±0.0008´´ (±0.019mm)	±0.0012´´ (±0.030mm)
Density			2.5g/cc		Helium Pycnometer
Temperature range			-25℃～125℃
Phase Change Softening Temperature			50℃~60℃
"Burn In" Temperature			70℃ for 5 minutes
Thermal Conductivity			2.5 W/mK		ASTM D5470 (modified)

Thermal Impedance @ 50 psi(345 KPa)

0.018℃-in²/W 0.020℃-in²/W 0.047℃-in²/W 0.072℃-in²/W 0.11℃-cm²/W 0.13℃-cm²/W 0.30℃-cm²/W 0.46℃-cm²/W

ASTM D5470 (modified)

Standard Thicknesses:
0.003"(0.076mm) 0.005"(0.127mm) 0.008"(0.203mm) 0.010"(0.254mm)
Consult the factory alternate thickness.
Standard Sizes:
10" x 16"(254mm x 406mm) 16" X 400´ (406mm X 121.92M)
PCS-A-11series are supplied with a white release paper and a bottom liner. PCS-A-11 series is available in kiss cut an extended pull tab liner or individual die cut shapes.
Peressure Sensitive Adhesive:
Peressure Sensitive Adhesive is not applicable for PCS-A-11 series products.
Reinforcement:
No reinforcement is necessary.