Benefit:
- Continuous roll package rubber
- General Thermal conductivity
- Ultra soft, highly compressible
- Good wetting
- Self tacky or additional PSA if required
Typical Applications:
- Information products
- Cooling components to the chassis
- Power module
- LED
Typical Properties:

G-Filler 802Series	Test method	G-Filler802	G-Filler802	G-Filler802	G-Filler802	G-Filler802	G-Filler802	G-Filler802
Construction & Composition		Silicone	Silicone	Silicone	Silicone	Silicone	Silicone	Silicone
Color	Visual	White	White	White	White	White	White	White
Thickness Tolerance		0.01"	0.02"	0.03"	0.04"	0.06"	0.08"	0.10"
Thickness Tolerance		±10%	±10%	±10%	±10%	±10%	±10%	±10%
Density (g/cc)		2.3g/cc	2.3g/cc	2.3g/cc	2.3g/cc	2.3g/cc	2.3g/cc	2.3g/cc
Hardness (Shore A)	ASTM D 2240	25	25	25	25	25	25	25
Breakdown Voltage	ASTM D149	3000Vac	>5000Vac	>5000Vac	>5000Vac	>5000Vac	>5000Vac	>5000Vac
Tensile Strength	ASTM D 638	N/A	N/A	40 psi	40 psi	40 psi	40 psi	40 psi
Elongation (%)	ASTM D 412	N/A	N/A	48	48	48	48	48
Elongation (%)	ASTM D 150	0.59	0.59	0.59	0.59	0.59	0.59	0.59
Outgasssing CVCM *Post Cured (%)		0.04	0.04	0.04	0.04	0.04	0.04	0.04
UL Rating		94V0	94V0	94V0	94V0	94V0	94V0	94V0
Continuous Use Temp (℃)	TGA+DMA	-40～200	-40～200	-40～200	-40～200	-40～200	-40～200	-40～200
Thermal Conductivity (W/mk)	ASTM 5470	3	3	3	3	3	3	3

Standard Thicknesses: 0.01"(0.25mm) 0.02"(0.51mm) 0.03"(0.76mm) 0.04"(1.02mm) 0.05"(1.27mm)
0.06"(1.52mm) 0.07"(1.78mm) 0.08"(2.03mm) 0.09"(2.29mm)
0.10"(2.54mm)
0.11"(2.79mm) 0.12"(3.05mm) 0.13"(3.30mm) 0.14"(3.56mm)
0.15"(3.81mm)
0.16"(4.06mm) 0.17"(4.32mm) 0.18"(4.57mm) 0.19"(4.83mm)0.20"(5.00mm)
STanDarD ThiCkneSSeS
Adhesive Tape : A1--Request adhesive on one side A2--Request adhesive on double side
Reinforcement : Fiberglass is required in all sizes.